Samsung SCC-B5366 Manual De Usuario página 23

• ATW1(Auto Tracing White Balance mode
1): The camera can automatically adjust the
color temperature in real time, according to
the ambient conditions. The color temperature
ranges from approx. 2500K to 9300K.
• ATW2: The color temperature ranges from
approx. 2,000K to 10,000K.
• AWC ( Auto White Balance Control): If you
press the SETUP switch in the appropriate item
position, Auto White Balance will perform once.
• 3200K : Set color temperature to 3200K
• 5600K : Set color temperature to 5600K
– RED : Adjusts the strength of the red color.
– BLUE : Adjusts the strength of the blue color.
– R-GAIN/B-GAIN : Enables you to set the current
color temperature manually.
– BRIGHTNESS : Select a brightness level in
switching from setting in DAY mode to setting in
NIGHT mode.
❖
DIGITAL ZOOM
You can set the digital zoom factor and position.
If you press the SETUP switch with the DIGITAL
ZOOM function set to ON, you will see the
appropriate screen.
When the zoom factor and position are defi ned,
the digital zoom function will operate.
How to use OSD Menu
[ON/OFF]
DIGITAL ZOOM
RATIO
< LOCATION >
- LOCATION : If you press the SETUP switch in the
condition where the image is enlarged as much as the
ratio setting, you can watch an invisible area of the
effective screen as well using the

Note :
If the digital zoom factor is set to larger than 1x, the FENCE
–
function will be deactivated.
The DIGITAL ZOOM function enlarges the pixel itself, which can
cause deterioration of the quality.
❖
DETAIL [0~3]
Controls the horizontal or vertical distinction.
❖
V-SYNC
Select the vertical sync mode for INT or LINE.
If you select INT, the camera will use the internal
synchronization.
If selecting LINE, the camera will use the external
power source frequency for the synchronization.
You can adjust the LL-PHASE.
[X1.0]
switch.
[INT, LINE]
English 23
–