Locating A Disc By Name; List-Up; Selecting The Specific Tracks For Playback; Bank - Sony MDX-C670 Manual De Instrucciones

Locating a disc by name

— List-up (CD changer with custom file
function or MD changer)
You can use this function for the discs that
have been assigned a custom name. For more
information on disc names, refer to "Labeling a
CD."
1
Press (LIST) momentarily.
The name assigned to the disc currently
playing appears in the display.
L S T
DISC
1 SCHUBERT
SUR EQ
ENTER
If you add disc memo labels to a CD-TEXT
disc, the display setting you make will
determine which information is displayed.
If the disc has only one set of information
(either CD-TEXT or disc memo labels ), that
information will be displayed regardless of
the display setting you make.
2
Press (LIST) repeatedly until you find the
desired disc.
3
Press (5) (ENTER) to play back the disc.
Notes
• Once a disc name has been displayed for five seconds, the
display goes back to its normal playback mode. To turn
off the display, press (DSPL).
• The track name are not displayed during MD playback.
• If there are no discs in the magazine, "NO Disc"
appears in the display.
• If a disc has not been assigned a custom file, "********"
appears in the display.
• If the disc information has not been read by the unit, "?"
appears in the display. To load the disc, first press the
number button, then choose the disc that has not been
loaded.
• The information appears only in upper cases. There are
also some letters which cannot be displayed (during MD
playback).
Selecting the specific
tracks for playback
— Bank (CD changer with custom file
function)
If you label the disc, you can set the unit to
skip tracks and play only the tracks you want.
1
Start playing the disc and press (SHIFT).
Then press (3) (PLAY MODE) for two
seconds.
Bank edit mode.
C D 2
DISC TRACK
5 1 Play
SUR EQ
PLAY MODE ENTER
Note
If you have not labeled the disc, the bank edit mode
does not appear and the programme edit mode appears.
To go back to the normal playback mode, press
(SHIFT).
2
Press either side of (SEEK/AMS) to select
the track number you want to skip and
press (5) (ENTER).
C D 2
DISC TRACK
5 3 Skip
SUR EQ
PLAY MODE ENTER
The indication changes from "Play" to
"Skip." If you want to return to "Play,"
press (5) (ENTER) again.
3
Repeat step 2 to set the "Play" or "Skip"
mode on all the tracks.
4
Press (3) (PLAY MODE) for two seconds.
The unit returns to the normal CD playback
mode.
5
Press (SHIFT).
Notes
• You can set the "Play" and "Skip" mode on up to 24
tracks.
• You cannot set the "Skip" mode on all the tracks.
Playing the specific tracks only
You can select:
• Back on to play the tracks with the "Play"
setting.
• Bank inv (Inverse) to play the tracks with the
"Skip" setting.
1
During playback, press (SHIFT), then
press (3) (PLAY MODE) repeatedly until
"Bank" appears.
2
Press (4) (n) to repeatedly until the
desired setting appears.
z Bank on z Bank inv
C D 1

BANK

Bank on
SUR EQ
PLAY MODE
Playback starts from the track following the
current one.
3
Press (SHIFT).
To go back to the normal playing mode, select
"Bank off" in step 2 above.
EN
z Bank off
15