Product Operation; Using The Rinslet; Cleaning The Rinslet; Short Term Non-Use - brondell Rinslet WS-12 Manual Del Usuario

PRODUCT OPERATION

Use and Maintenance

Using the Rinslet

To activate a wash function, turn the control knob
to the left for a Front (feminine) wash, or to the
right for a Rear wash.
• The further the knob is turned, the higher
the water pressure will be.
• To lower the water pressure, turn the knob
back towards the center.
• To stop the flow of water, rotate the knob
to center so it sits flat.

Cleaning the Rinslet

To clean the nozzles, open the Nozzle Guard door
by pulling it gently open on the right side. With the
nozzle revealed, pull down on the nozzle cap, and
clean the spray holes and nozzle using a toothbrush
or soft cloth and mild detergent (such as dish soap).
When cleaning, be careful not to drop or flush
the nozzle cap. Periodically tighten the cap so it
doesn't become loose with use and cleaning.
To clean the Rinslet, use a mild cleaner such as
Simple Green or Windex spray. Do not scrub or use
harsh, abrasive products to clean the Rinslet, as
they may scratch the product.

Short Term Non-Use

If the product will not be used for more than a
few weeks, you may consider shutting the water
supply off at the wall for extra precaution.
9