KNLEDFL10W1 / KNLEDFL20W1
LED floodlight
Description (fig. A)
The LED floodlight is a broad-beamed, high-
intensity artificial light device equipped with a
LED lamp. The floodlight can produce bright
light without the use of expensive fixtures and
numerous bulbs. The floodlight can also provide
users with an easy and affordable way to deter
intruders and animals. The device is suitable for
both indoor and outdoor use.
1.
LED lamp
2.
Reflector
3.
Glass plate
4.
Front cover
5.
Lock screw
6.
Heat sink
7.
Lamp bracket
Installation (fig. B)
The light must be installed and serviced by a
qualified technician. The device can be mounted
to the wall or to the ceiling.
Warning!
• Before installation, switch off the device, remove
the mains plug from the wall socket and wait
until the device has cooled down.
• Refer to the illustration to install the device
correctly.
Wiring instructions
Code
Description
N
Neutral wire
Earth wire
L
Live wire
Cleaning and maintenance
Warning!
• Before cleaning or maintenance, switch off the
device, remove the mains plug from the wall
socket and wait until the device has cooled
down.
• Do not use cleaning solvents or abrasives.
• Do not immerse the device in water or other
liquids.
• Do not clean the inside of the device.
• Do not attempt to repair the device. If the
device does not operate correctly, replace it
with a new device.
• Clean the outside of the device using a soft,
damp cloth. Thoroughly dry the outside of the
device with a clean, dry cloth.
Technical data
Input voltage
Frequency
Wattage
Ingress protection class
(IP code)
Luminous flux
Colour rendering index (CRI)
Colour temperature
Beam angle
Ambient temperature
Dimensions (LxWxH)
Weight
Warranty
Colour
Blue
Green/yellow
Brown
1 1
English
KNLEDFL10W1
KNLEDFL20W1
100 - 240 V AC
100 - 240 V AC
50 - 60 Hz
50 - 60 Hz
10 W
20 W
IP65
IP65
700 lm
1400 lm
> 70
> 70
5500 - 6500 K
5500 - 6500 K
(Daylight white)
(Daylight white)
120°
120°
-25 °C ~ 40 °C
-25 °C ~ 40 °C
114.5x86x78 mm
180x140x100 mm
450 g
900 g
2 years
2 years