Maintenance
To protect your bath furniture, we suggest the following:
□
Avoid placing your furniture in direct sunlight, as sunlight causes fading.
□
Clean up spills immediately. Use a blotting rather than a wiping action. Water left over a long period of time will cause white spots in
the finish.
□
Alcohol, perfume, after-shave and medications can cause severe damage to the finish.
Care and Cleaning
□
Dust frequently with a clean, soft, dry, lint-free cloth. Clean the surface by rubbing in the direction of the grain.
□
Polish your furniture approximately every six months with a product that contains detergents, emulsifiers and mineral oil. The
detergents clean dirt from the furniture; the emulsifiers give it body to clean and last longer; the mineral oil is left behind as a barrier
for dirt and moisture that can harm the finish. There is no grit to harm the finish, no wax build-up, and no silicone to raise the sheen
and act as a barrier for touch-ups and refinishing.
□
Clean the outside surface with mild soap, warm water, and a soft cloth.
□
On stubborn stains, use a powdered detergent and damp sponge or nylon scouring pad.
□
Never use abrasive scouring powders, cleansers, or pads because they will scratch, damage, and dull the surface.
□
Clean the sink surface with mild soap and warm water, then dry with a soft cloth.
Engineered stone tops:
□
Use a damp cloth and liquid detergent for regular cleaning to remove mineral deposits and soap scum. Do not use abrasive cleaners,
steel wool, scouring pads, scrapers, or sandpaper on any part of the surfaces.
□
To remove plaster or construction residue, scrape the surface slightly with a wooden edge and wash with liquid detergent. Never use
wire brushes or metal tools on any part of the engineered stone surface.
□
If the stain is from hard water or mineral deposits, try using a cleaner for removing iron, calcium, or other such mineral deposits that
are in your water supply. Most cleaning chemicals will not damage the top as long as label instructions are followed.
6