Conceptronic CSATA2P Guía De Instalación Rápida página 12

ENGLISH
7. The Setup Wizard will show a summary of the selected components. Click "Next"
to start the installation.
8. When the installation is complete, you will see an installation overview. Click
"Next" to continue.
9. Select the option "Yes, I want to restart my computer now" and click "Finish" to
complete the installation.
When your computer is restarted, the CSATA2P Controller Card is
V-RAID Utility Note:
The VIA V-Raid Utility can only be started when you are logged in as "Administrator" or
when you run the program as 'Administrator".
If you run the VIA V-Raid Utility without Administrator Rights, the program will generate
an error and does not allow you to review/change the configuration of the connected
hard disks. Please exit the program and restart the VIA V-RAID Utility with Administrator
Rights.
(Right-click, and choose "Run as...").
eSATA Note:
The CSATA2P Controller Card has an eSATA connection on the backplate. This eSATA
connection can be used to connect eSATA enclosures, like the Conceptronic CHD3UES.
The chipset of the CSATA2P Controller Card does not support Hot-Plug functionality.
Therefore, it is strongly advised to reboot your computer after you connected the
enclosure to the CSATA2P Controller Card.
ready to use.
12