General Guidelines - HQ-Power HQSM10003 Manual Del Usuario

3.

General Guidelines

Refer to the Velleman
Keep this device away from dust and extreme temperatures. Make sure the ventilation
openings are clear at all times. For sufficient air circulation, leave at least 6" (± 15 cm) in
front of the openings.
Protect this device from shocks and abuse. Avoid brute force when operating the device.
•
Familiarise yourself with the functions of the device before actually using it. Do not allow operation by
unqualified people. Any damage that may occur will most probably be due to unprofessional use of the device.
•
All modifications of the device are forbidden for safety reasons. Damage caused by user modifications
to the device is not covered by the warranty.
•
Only use the device for its intended purpose. All other uses may lead to short circuits, burns, electroshocks,
lamp explosion, crash, etc. Using the device in an unauthorised way will void the warranty.
•
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and
the dealer will not accept responsibility for any ensuing defects or problems.
•
Mechanical wear and LEDs are not covered by warranty.
•
A qualified technician should install and service this device.
•
Do not switch the device on immediately after it has been exposed to changes in temperature.
Protect the device against damage by leaving it switched off until it has reached room temperature.
•
This device is designed for professional use on stage, in discos, theatres, etc.
•
Use the appropriate power supply (see Technical Specifications below).
•
There may be some smoke or a particular smell when the device is activated for the first time. This is
normal and any smoke or smell will gradually disappear.
•
Use the original packaging if the device is to be transported.
•
Keep this manual for future reference.
4. Features
•
smoke machine with removable wired remote controller
•
removable fluid tank
HQSM10003
•
quick warm-up time: ± 3 minutes
•
good smoke output for 23 seconds
•
fluid sensor: device shuts off automatically when the fluid is low
•
3 LEDs on the back indicate the machine working status
HQSM10004
•
timer remote controller optional
•
no DMX
•
no fluid sensor
5. Overview
Refer to the illustrations on page 2 of this manual.
1
power input + fuse holder
2 on-off switch
3 remote control
4 stand-by LED
5 warm-up LED
V. 02 – 15/06/2020
HQSM10003/HQSM10004
® Service and Quality Warranty on the last pages of this manual.
6
power LED
7 carrying handle
8 fluid tank
9 output nozzle
4 ©Velleman nv