Basic Operation; Network Setting - ViewSonic VSD220 Guia De Inicio Rapido

G. Power saving mode and Returning to operation
Entering Power Saving Mode
While product is in operation, briefly press of the power button puts the unit into power saving mode.
Returning from Power Saving Mode
While the power LED lights orange, briefly press the power button to return from power saving mode
H. Basic Operation
Lock Screen
Home Screen
Tool icons
Shows the list of all
All applications
applications.
Shows menu of the current
Menu
application.
Depending on the screen shown, the content displayed in tool icons may vary.
Status display
I. Network Setting
Connecting to Wireless LAN
1) Tap "All applications" – "Settings".
2) Turn "Wi-Fi" to ON by dragging "OFF" to the right.
3) When Wi-Fi is turned on, a list of all available wireless LAN access points will be shown on the right
side of the screen. Tap the desired Wireless LAN access point for connection.
4) If a password is required, enter it and tap "Connect" to connect to the wireless LAN.
Connecting to RJ45
Simply plug in your Ethernet cable to the RJ45 port to connect to a LAN. No set-up or configuration is
required.
1) Touch the .
2) Drag to .
3) Home screen is shown.
Operation buttons
Back button
Home button
Recently used
applications
OSD
Desktop area
6
is shown besides the
Returns to previous screen.
Returns to Home screen.
Shows the list of recently used
applications.
Shows the display's settings
menu.
.