Tripp-Lite U457-2M2-SATAG2 El Manual Del Propietario página 6

Installation
7. Slide the ON/OFF switch on the front plate to "ON".
Note: In the event additional power is needed, a DC-In jack has been
provided. The power supply is not included. See "Powering the Unit"
section for DC-In information.
8. The enclosure is now ready to use. The blue LED light will
illuminate solid to indicate power and will blink when reading/
writing data.
Specifications:
Drive Connection
USB Connection
LED
Maximum Data Transfer Rate
Max Drive Capacity
Operating Temperature
Operating Humidity
USB Type-C and USB-C are trademarks of USB Implementers Forum
22-Pin SATA Data + Power
USB Type-C
Blue: Power and Data Access
10 Gbps
Tested up to 2 TB
50° to 122° F (10° to 50° C)
10% to 80% RH
6