Firmware Update; Web Server - BeeWi BBP200 US Guía De Utilización

7
- Presence: 24, 12, 6, 3 and 1H
Note the temperature is shown in steps of 1° C and presence in slots of 10 minutes
3.4. Edition Screen
The edition screen allows for editing SmartPlug details such as name and picture and
other settings such as presence recording.
The edition screen also includes a button to update SmartPlug with the latest firmware or
to switch it in remote mode. To update the firmware, just press the "Update peripheral"
button in Edition screen, then confirm action and wait for about 6 minutes for the
firmware update to be confirmed.
4. GATEWAY MODE
4.1. Introduction
SmartPlug can also be controlled remotely via the internet using a specific internet
gateway. For more information, see our web site www.bee-wi.com.
In that case, it is necessary to use a different web application as described in the BeeWi
Gateway manual. SmartPlug can be turned into remote mode by means of a firmware
update and switched back into standalone mode by means of a restoration.

4.2. Firmware update

To turn SmartPlug into remote mode, connect it to your Smartphone using the SmartPad
app and press the "Remote Mode" button in Edition screen. The firmware update will last
approximately 6 minutes.
It is possible to revert to the default local access SmartPlug firmware by simply restoring
the factory firmware (see 2.4).
4.3. Pairing
Once turned into Gateway Mode, SmartPlug will no longer be accessible using the
SmartPad app but only via the BeeWi HomeBee server.
In order to list your SmartPlug as part of the HomeBee network, it is necessary to pair it
securely with the Master Gateway. To do this, follow these steps:
1) Fit SmartPlug into a wall socket. The LED will flash once per second
2) Press the SmartPlug button for 2 seconds until the LED flashes twice per second.
3) Press the Gateway button for 5 seconds until the LED flashes twice per second to
initiate pairing.
4) Once SmartPlug has been successfully paired with the Gateway, the LED will revert
to the connected state flashing once par second and the new peripheral will show in the
web app home screen.

4.4. Web server

Go to the HomeBee portal using a web browser or the web app to access your peripheral.
ENGLISH