TermoVana KING Manual Del Usuario página 111

INDEX
1 GENERAL INTRODUCTION
1.1 SYMBOLS
1.2 DESTINATION OF USE
1.3 SCOPE AND CONTENTS OF MANUAL
1.4 STORAGE OF MANUAL
1.5 UPDATE OF THIS MANUAL
1.6 GENERAL INFORMATION
1.7 MAIN STANDARDS APPLIED AND TO BE APPLIED
1.8 LEGAL WARRANTY
1.9 MANUFACTURER'S LIABILITY
1.10 CHARACTERISTICS OF THE USER
1.11 TECHNICAL ASSISTANCE
1.12 SPARE PARTS
1.13 IDENTIFICATION PLATE
1.14 STOVE DELIVERY
2 SAFETY WARNINGS
2.1 WARNINGS FOR THE INSTALLER
2.2 WARNINGS FOR THE MAINTENANCE TECHNICIAN
2.3 WARNINGS FOR THE USER
3 CHARACTERISTICS OF FUEL
3.1 CHARACTERISTICS OF FUEL
3.2 STORAGE OF PELLETS
4 HANDLING AND TRANSPORT
4.1 REMOVAL FROM TRANSPORT PALLET
5 INSTALLATION
5.1 GENERAL CONSIDERATIONS
5.2 SAFETY PRECAUTIONS
5.3 PLACE OF INSTALLATION OF STOVE
5.4 COMBUSTION AIR
5.5 FLUE GAS EXHAUST PIPE
5.6 STOVE LEVELLING
5.7 CONNECTION TO UTILITIES
5.8 OPTIMISATION OF COMBUSTION
5.9 VENTILATION
6 MAINTENANCE
6.1 MAINTENANCE
7 DEMOLITION AND DISPOSAL
8 USE
8.1 INTRODUCTION
8.2 FIRST START-UP
8.3 CONTROL PANEL
8.4 MAIN MENU
8.5 SETTING THE TEMPERATURE
8.6 SETTING THE OPERATING PROGRAM
8.7 TURNING ON THE STOVE
8.8 TURNING OFF THE STOVE
8.9 RESETTING SYSTEM ERRORS
8.10 HEATING MODE
8.11 PELLET SAVING MODE
8.12 AUTOMATIC OR MANUAL MODE
8.13 MANUAL
8.14 AUTO
9 USER PROGRAMMING
9.1 DATE AND TIME SETTINGS
9.2 WEEKLY PROGRAMMER
9.3 PROGRAM NUMBER
9.4 DAY OF THE WEEK
9.5 HOURS
9.6 MINUTES
9.7 REQUIRED TEMPERATURE
9.8 REQUIRED PROGRAM
9.9 PROGRAM TYPE
9.10 ENABLING THE PROGRAM
> 4-6
9.11 EXAMPLE OF PROGRAMMING
10 STOVE PARAMETERS
10.1 LOADING PELLETS
10.2 FUME EXTRACTION
10.3 ROOM FAN
11 LANGUAGE SELECTION
12 LAST ERROR LOG
13 DUCTED
13.1 DUCTED LEFT
13.2 DUCTED RIGHT
> 7-8
14 DIAGNOSTIC ERRORS
14.1 ERROR 1 NOT ACTIVE
14.2 ERROR 2 PRESSURE SWITCH ALARM
> 9 14.3 ERROR 3 NO PELLETS
14.4 ERROR 4 NOT ACTIVE
14.5 ERROR 5 HIGH EXHAUST TEMPERATURE ALARM
14.6 ERROR 6 SAFETY THERMOSTAT
14.7 ERROR 7 SMOKE EXTRACTION MOTOR ALARM
> 9
14.8 ERROR 8 NOT ACTIVE
14.9 ERROR 9 NOT ACTIVE
14.10 ERROR 10 NOT ACTIVE
14.11 ERROR 11 NOT ACTIVE
> 10-14
14.12 ERROR 12 POWER FAILURE
14.13 ERROR 13 NOT ACTIVE
14.14 ERROR 14 NOT ACTIVE
14.15 ERROR 15 IGNITION FAILURE
14.16 ERROR 16 INTAKE SENSOR FAULT (ONLY IF INTAKE SENSOR
ENABLED)
14.17 ERROR 17 NOT ACTIVE
14.18 ERROR 18 FUME EXTRACTION CIRCUIT FAULT
14.19 ERROR 19 OVERTEMPERATURE ALARM
REMOTE CONTROL (OPTIONAL)
15 PRELIMINARY OPERATIONS
> 15
15.1 PELLET LOADING
15.2 ELECTRICAL POWER SUPPLY
15.3 POWER ON
> 16
15.4 POWER OFF
15.5 OPERATION WITH ROOM PROBE ON STOVE
> 17-18
TROUBLESHOOTING
16 CLEANING
17 FRAME ASSEMBLY
18 HOT AIR DUCTING
19 3RD TANGENTIAL FAN
ID PLATE KEY
WIRING DIAGRAM
> 19
DESCRIPTION
TECHNICAL SPECIFICATIONS
REMOVAL FROM PALLET
MINIMUM DISTANCE FROM COMBUSTIBLE MATERIALS
DIMENSIONS
08/2021 - EN
> 20
> 20
> 21
> 22
> 24
> 26
> 28
> 29
> 30
> 31
> 32
> 33
> 34
> 36
> 36
> 37
3