English - AEG EWA77 Serie Manual De Instrucciones

ENGLISH

Thank you for choosing an AEG product. In order to ensure the best results, always use original AEG accessories and
spare parts. They have been designed especially for your product. This product is designed with the environment in
mind. All plastic parts are marked for recycling purposes.
COMPONENTS
. Jug
A
. Removable mesh filter
B
. Spout
C
. Lid
D
. Opening lid button
E
. Handle
F
G . Water level indicator
Picture page 2-3
GETTING STARTED
1
Before first use, wipe the inside and outside of the kettle with a damp cloth.
2
Place the base unit on a firm and flat surface. Plug the mains plug into a wall socket. Redundant cord can be wound into the
bottom of base unit.
3
Press the button to open the lid, pour water into the kettle. Make sure water level is visible in the water level indicator, but
not exceeding the Max. mark. Fill at least 0,6 L to ensure that the temperature shown on the display is reliable. Recom-
mended temperatures:
40-60 °C for baby mixtures
80 °C for delicate teas (green/white)
90 °C for instant coffee or soup
100 °C for perfect black tea
4
Close the lid and make sure it snaps in correctly. Place the kettle onto the base. The kettle beeps to indicate that it is ready
for use. The display shows the water temperature.
5
Press the START/KEEP WARM button. When the water boils, the kettle beeps 3 times and switches off automatically .
6
To heat water to selected temperature (not boiling): Press the buttons
KEEP WARM button. When the selected temperature is reached, the kettle beeps 3 times and switches off automatically.
7
To boil water and keep it warm at 90 °C: Press the START/KEEP WARM button twice. When the water boils, the kettle
beeps 3 times and keeps the water warm for 30 minutes.
8
To boil water and keep it warm at selected temperature: Press the buttons
START/KEEP WARM button twice. When the selected temperature is reached, the kettle beeps 3 times and keeps the water
warm for 30 minutes. The kettle heats the water to 100°C and then keeps the selected temperature.
9
The automatic switch off function. When the water has boiled or the kettle is moved from the base, it will switch off automati-
cally. If you wish to stop the heating process before the water is boiling, simply press the START/KEEP WARM button again.
The left LED light on the START/KEEP WARM button indicates boiling is in progress, the right LED light indicates KEEP
WARM function is active.
CLEANING AND CARE
10
Before cleaning, always unplug the appliance. Never rinse or immerse the kettle or base unit in water. Just wipe with a
damp cloth, using no abrasive detergents. Occasionally rinse out the kettle with clean water.
11
To clean the mesh filter, grab the strainer insert and lift out. Cleaning the heating plate – superficial spots of rust may ap-
pear on the base unit. Remove with a stainless steel cleaning agent.
12
Decalcifying is recommended regularly, depending on water hardness. Fill the kettle with water and decalcifier according
to decalcifier product instructions. Do not boil the solution as it may foam over. Afterwards, rinse kettle thorougly with fresh
water.
Enjoy your new AEG product!
www.aeg.com
EWA77xxx_WaterKettle_AEG.indd 6
. Display
H
. Temperature selector down ( )
I
. Temperature selector up ( )
J
. START/KEEP WARM button
K
Separate base and mains cable
L
or to select temperature. Press the START/
or to select temperature. Press the
6
2017-06-05 10:57:51