Tripp-Lite WEBCARDLX El Manual Del Propietario página 6

Installation
3 - Static IP Address Assignment/Terminal Menu
Configuration Settings
3-1
Determine IP Information: The WEBCARDLX and WEBCARDLXMINI can
support a single static IPv4 address (requires setting the IP address, subnet
mask and gateway) and/or a single static IPv6 address. In addition, the
WEBCARDLX and WEBCARDLXMINI can support a single static IPv4 or an IPv6
DNS address that is required to be entered.
3-2
Configure Terminal Emulation Program: If you have not already done so,
download the serial over USB driver (TL-cdc) from the Tripp Lite website. The driver
can be found by going to www.tripplite.com/support and typing WEBCARDLX in
the search field. To install the driver, follow the instructions provided. Once the
driver is installed and a COM port has been assigned, set your terminal emulation
program to use the COM port that corresponds to the USB port.
3-3
Connect WEBCARDLX / WEBCARDLXMINI to Computer: Connect your PC to
the Micro-USB port on the WEBCARDLX or WEBCARDLXMINI using the cable
provided.
6