Operation - Glacier bay HD67522X-5201 Guía De Instalación Y Cuidado

Installation (continued)
7
Connecting the shower hose
□
Connect one end of the shower hose (I) to the
mixer (C) and the other end to the showerhead (H).
□
Ensure the washer (1) is placed into each end
for seal.

Operation

1
Flushing and checking for leaks
□
Turn on the water supply and allow both hot
and cold water to run for at least one minute
each. Press the pin (1) to the bottom position,
and ush water lines for one minute. This
ushes away any debris that could cause
damage to internal parts. Check for leaks.
□
After ushing, turn the handle all the way
off to shut off the water. The pin should
now be in its normal position. Re-tighten
any connections if necessary, but do not
overtighten.
H
1
I
1
7
Please contact 1-855-HD-GLACIER for further assistance.
C
1
HOMEDEPOT.COM