Turning The Camera On And Off; Taking Photos; Continuous Shooting; Playback Mode - LEXIBOOK DJ020 Serie Manual Del Usuario

Tabla de contenido

Idiomas disponibles

All manuals and user guides at all-guides.com

TURNING THE CAMERA ON AND OFF

1. Press the Power/Mode button (4) to turn the camera on. The camera will make a

beep sound to confirm that it is ready for use.

2. Press and hold the Power/Mode button (4) for a few seconds again to turn it off.

Note: The camera will auto power off after 60 seconds of inactivity.

Single shooting

You are already in "Single shooting" mode when you switch on the camera. Press

the Shutter button (3) to take a photo. The camera will beep to confirm that a picture

is taken. The number of pictures that you can take in memory is shown on the LCD

screen.

1. When you are in "Single shooting" mode, press the Power/Mode button (4) once

to get in "Continuous shooting" mode.

2. The "Continuous shooting" mode will be displayed in the upper-right corner of

the screen. Press the Shutter button (3) within the next 3 seconds to take 3 pictures

continuously.

Note: When the camera's built-in memory is full, you will not be able to take any

pictures.

1. Switch on the unit then press the Playback mode (5) button.

2. Use the Up (6) and the Down (7) buttons to display the next or the previous photo.

3. To exit the playback mode, press the Playback mode (5) at any time.

Note: If there are no pictures stored in the camera's built-in memory, the playback

mode is not available.

Deleting one file in playback mode

In playback mode, use the Up (6) and the Down (7) buttons to display the desired

photo then the Shutter button (3) twice to delete it.

Tabla de Contenido

Tabla de contenido