SN2008 - Infrared
3
Make Electrical Connections
WARNING! The Accuzone Infrared activation must be connected with a 12V DC plug in adaptor. Connections
to 110 VAC can cause personal injury and will result in damage to the electronics.
STOP!!! If installing optional Shroud/Slip Ring or Towel Dispensers, complete those installations before
proceeding to Step 4 (see Optional Equipment Installation page).
IR Sensor
(269-1184-DC)
Snap each sensor circuit plug into the
A
associated solenoid circuit plug located on
the valve bracket .
Snap the wall adapter barrel plug into the
B
barrel plug located on the valve bracket
wire harness .
6
Sensor
Sensor
Sensor
(Green)
Sensor
(Black)
(Yellow)
8/21/2017
Sensor
Sensor
(Green)
Sensor
(Black)
(Yellow)
(Red)
Splitter
(251-027A)
Plug-In Adapter
(261-147A)
Bradley • 215-1069 Rev. L; ECN 17-00-002
Installation
Sensor
(Red)
Valve Set
(TMA: S45-3887
TL: S45-3888)