Starting Up The Set; Starting Up The Wic 100 Display; Starting Up The Usb Adapter; Installing The Pc Program - eQ-3 i@Sky Manual De Instrucciones

6. Starting up the set

6.1. Starting up the WIC 100 display

First prepare the display:
• Latch the silver stand into the opening provided for this
purpose on the rear of the weather display.
• Open the battery compartment and insert the three Mignon
(AA/LR6) batteries provided (making sure that you insert
them the right way round).
• Close the battery compartment cover.

6.2. Starting up the USB adapter

The i@Sky adapter is now connected to the PC:
• Connect the i@Sky USB adapter to a USB port on the PC
where the i@Sky program is to be installed.
• Then raise the antenna of the i@Sky USB adapter.
Important! It is not necessary to install any special
drivers.

6.3. Installing the PC program

The i@Sky PC program is used to transmit weather data from
the Internet to the USB adapter, and is installed by following the
steps below:
• Open the Internet browser on the PC where the i@Sky pro-
gram is to be installed.
• Download the i@Sky program from www.iatsky.com and
store it in a temporary folder.
• Start the program you have downloaded and follow the
installation instructions.
22