Glacier bay HD67772W-5091 Guía De Uso Y Mantenimiento página 5

Installation (continued)
3
Installing the pop-up body
□
Place the washer (F) underneath the ange of
the pop-up body (E). Slide the pop-up body (E)
down through the drain hole on the vessel or
basin.
□
From underside, slide the washer (G) against
the bottom of the vessel or basin, thread on
the coupling nut (H) and tighten. Do not over
tighten.
G
H
5
Making the water supply
connections
NOTE: The hot side inlet tube is indicated by a label. Avoid
twisting wires together or placing the wires close to each
other and damaging.
□
Thread the nut (1) on the supply line onto the
outlet of the water supply valve (2) and tighten
with a wrench. Do not overtighten.
F
E
4
Installing the tail pipe
□
Slide the nut (J) over the tail pipe (K).
□
Place the washer (I) into the nut and tighten.
Do not overtighten.
1
2
5
Please contact 1-855-HD-GLACIER for further assistance.
I
J
K
HOMEDEPOT.COM