Microphone Jack - Toshiba dynadock V3.0 Guía De Usuario

Component
Power light
USB activity
light
Powered USB
3.0 ports
(USB Sleep and
Charge ports)
Headphone jack
Microphone
jack
NOTE
The power or USB Hub light is visible only when the AC adaptor or at
least one USB device is connected respectively.
Introduction
Description
Glows blue when power is supplied via AC
adaptor.
Glows green when a USB device is
connected to the dynadock™.
Connection point for USB 3.0, 2.0, or 1.1
devices. When the dynadock™ is powered
ON, this port charges the connected battery-
powered USB devices (such as MP3 players
and mobile phones), even when the
dynadock™ is disconnected from your
computer or your computer is off. For more
information, please see
devices using Toshiba USB Sleep and
Charge" on page 31.
Note 1: Some USB devices may not support
this feature.
Note 2: 5 GBps is the maximum theoretical
interface transfer rate per the specifications
of the Universal Serial Bus 3.0. The actual
transfer rate will vary depending on your
system configuration and other factors.
Note 3: Certain USB devices, such as
optical disk drives and hard disk drives,
have high power requirements.
Note 4: If your USB device came with an
AC adaptor, be sure to connect the device to
a power outlet with the AC adaptor.
A standard 3.5 mm jack for stereo audio
output to headphones/headsets/speakers.
A standard 3.5 mm jack for mono audio
input from a microphone/headset.
Quick Tour
"Charging USB
13