General Safety Notes; Notes On Ul Approval; Intended Use; Operating And Status Indicators - SICK ZTB18 Instrucciones De Operación

1

General safety notes

2

Notes on UL approval

3

Intended use

4

Operating and status indicators

5

Mounting

8021944 | SICK
Subject to change without notice
Read the operating instructions before commissioning.
■
■
Connection, mounting, and configuration may only be performed by trained
specialists.
■
NO
2006/42/EG
Not a safety component in accordance with the EU Machinery Directive.
SAFETY
■
When commissioning, protect the device from moisture and contamination.
These operating instructions contain information required during the life cycle of
■
the sensor.
Blue housing types (Zxx18-1xxxxx ... Zxx18-9xxxxx):
• Type 1 enclosure
Clear housing types (Zxx18-Axxxxx ... Zxx18-Jxxxxx):
• Type 1 enclosure
• Class 2 power supply required
The ZTB18 is an opto-electronic photoelectric background suppression proximity sensor
(referred to as "sensor" in the following) for the optical, non-contact detection of
objects, animals, and persons. If the product is used for any other purpose or modified
in any way, any warranty claim against SICK AG shall become void.
Photoelectric proximity sensor with background suppression.
1
2
Figure 1: Status indicators
LED indicator (green): power
1
LED indicator (orange): light received
2
Mount the sensor using a suitable mounting bracket (see the SICK range of acces‐
sories).
GENERAL SAFETY NOTES
1
5