Schneider Samos Instrucciones De Montaje página 47

Setting the desired inclination:
Loosen the locking screw on the crank housing and move it to set the
desired inclination.
Tighten the locking screw.
Closing:
To close the umbrella loosen the locking screw on the crank housing and
turn the crank (I) counter clockwise in the direction of "CLOSED".
At the same time allow the crank housing to slide slowly down on the pole.
Secure the closed umbrella with the strap.
We recommend using the included protective cover if the umbrella is not
used for an extended period or in case of rain.
IMPORTANT:
Inclining the umbrella significantly increases the
surface exposed to the wind.
In windy conditions, always close the umbrella and
secure with the strap.
EN
47