Direct Operations Using The User Buttons And Osd/Time Dial - Panasonic AW-HS50E Instrucciones De Operación

2. Preparations

2-5-6. Direct operations using the USER buttons and OSD/TIME dial

The functions that have been assigned to the USER buttons are displayed in the USER button status display area,
and the setting itemes which can be operated directly using the USER buttons and OSD/TIME dial are displayed
in the states listed below.
When this happens, the functions assigned to the USER buttons are disabled.
  When the chroma key marker is displayed
  When the submenu [2] WIPE Menu is displayed
  When the submenu [3] PinP Menu is displayed
  When the submenu [5] KEY Adjust Menu is displayed
When a particular USER button is pressed at this time, the status in which to change the settings shown in the
status area is established, and the value concerned can be changed by turning the OSD/TIME dial.
The values that have been changed are reflected instantly.
U1: USER 1 button
U2: USER 2 button
U3: USER 3 button (SHIFT button + USER 1 button)
U4: USER 4 button (SHIFT button + USER 2 button)
Example: When [2] WIPE Menu is displayed
The value of "B" for the 3. Border/Soft item has been set.
The "B" value is blinking.
The indicator of the USER 1 button lights.
The value stops blinking.
The cursor moves
to the last line that
displays the USER
button status.
The state in which the value (Pos-X)
of "X" for the 6. Position item can be
changed is now established.
Press the USER 1 button.
Turn the OSD/TIME dial to change
the value.
The "X" value is changed, and it is
reflected instantly.
Press the USER 1 button.
The USER 1 button indicator goes off, the direct
operation is cancelled, and operation returns to the
3. Border/Soft item setting.
28 (E)