Replacing The Refrigerator Light Bulb; Transportation And Changing Of Installation Position; Repositioning The Door - Schneider SFCES17021B Manual De Instrucciones

Replacing the Refrigerator Light Bulb

1. Unplug the unit from the power supply,
2. Remove the refrigerator light cover (A) by pressing
the hooks placed both sides of the cover.
3. Change the present light bulb (B) with a new one
(not more than 15 W ).
4. Place the light cover in its place and plug the unit.
If the illumination is occured via LED strip
Please call the service man.
TRANSPORTATION AND CHANGING OF
PART 5.
INSTALLATION POSITION

Transportation and Changing of Installation Position

• The original packages and foamed polystyrene (PS) can be concealed if required.
• In transportation the appliance should be tied with a wide stripe or a strong rope. The
rules written on the corrugated box must be applied while transporting.
• Before transporting or changing old
installation position, all the moving objects
(i.e., shelves, crisper...) should be taken
out or fixed with bands in order to prevent
the shake.

Repositioning the Door

• It is not possible to change the opening direction of your fridge door, if the door
handles on your fridge are installed from the front surface of the door.
• It is possible to change the opening direction of the door on models without any
handles.
• If the door opening direction of your fridge may be changed, you should contact the
nearest Authorized Service to have the opening direction changed.
EN - 38 -
B
A