Descargar Imprimir esta página

nedis WEST300WT Manual De Uso página 2

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 16
First insert 1 AA battery into the battery compartment after opening the battery door of the
wall clock, then insert 2 AAA batteries into the sensor (transmitter) after opening the battery
door with a screw driver.
Functions and features:
-
Indoor temperature display
-
RF outdoor temperature display
-
Weather forecast display
-
RF receiving channels: CH1, CH2, CH3
-
Temperature format: (°C/°F)
-
Outdoor temperature range: -20 °C–50 °C, Accuracy: +/–1 °C
Time setting
-
After putting 1 AA battery into the compartment, adjust the back wheel to set the time.
RF outdoor temperature instruction
Normal mode keys functions:
-
Press the "°C/°F/DOWN" key to switch between °C/°F.
The default temperature format is: °C.
-
Press the "CH/UP" key to switch between CH1, CH2 and CH3.
RF receiving
-
After inserting the batteries in the clock and outdoor sensor, it will automatically enter
RF mode receiving for 3 minutes. The icon of the antenna will start to flash with 1 Hz
frequency.
-
In normal mode, hold the "UP" key for 2 seconds to clear the display data of the current
RF channels and renew the data again.
-
If no signals are received within 60 minutes, the CH temperature will show "--.-", and it
will enter an RF long receiving mode for 3 minutes.
-
If it receives effective signals within 3 minutes, it will exit the RF long receiving mode and
enter the normal mode.
-
If a signal is still not received within 3 minutes, it will exit RF receiving mode and enter the
RF long receiving mode within an hour. This will repeat every hour till it receives a signal.
-
During RF receiving, the antenna icon starts to flash with 2 Hz frequency, and it will keep
the icon on screen if it receives the temperature signal. If no temperature is received, the
icon will disappear.
Weather forecast functions:
-
Weather forecast functions can forecast the weather conditions of the next 24 hours.
-
Weather grade: Sunny/Slightly Cloudy/Cloudy/Rainy.
Sunny
Slightly Cloudy
-
Time of sensing: 30 minutes.
Cloudy
Rainy
2
ENGLISH

Publicidad

loading