Promounts UA-PRO210 Manual De Instrucciones página 5

For more information, visit:
www.promounts.com
Promounts name, logo and model numbers are property of Promounts.
TM
®
© Promounts
2011
AUM009 v1.1
INSTALLATION (3)
A
B
A
H
B
5
I
J
6
UA-PRO210
Step 5:
Cable Management:
5.1 To install the cable, first you
need to remove the end cover (I)
and slide the cable cover (J) out
from the arm.
5.2 Do the same for the rest of the
cable covers before installing the
cables.
5.3 Install the cables and slide the
covers back to the arm.
5.4 Install the end covers.
Step 6:
Adjusting the Display:
6.1 Slight loosen Bolt (A); do not
loosen fully or remove it, otherwise
injury may occur.
6.2 Grasp the upper and lower
edge of the Display, and then push
or pull the Display to the
desired tilt angle.
6.3 Tighten Bolt (A).
6.4 If necessary, adjust horizon
with bolts (H), as in step 4.5.
5