Belkin Hi-Speed USB 2.0 Manual Del Usario página 10

P73890-A_F5U222ea_man.qxd
Installation (continued)
8. Select "Search for the best driver for your device
(Recommended)" and click "Next".
9. Uncheck all the boxes and click "Next".
10. Windows will locate the drivers for "NEC USB Open Host
Controller". Click "Next".
(Windows may prompt you to insert the Windows OS
installation CD. If so, insert the CD into the CD-ROM drive
and continue the installation procedure).
11. Installation of the "NEC USB Open Host Controller" will
now complete. Click "Finish".
12. The "Add New Hardware" wizard will repeat the
installation process for the second OHCI host controller.
13. Repeat steps 8-11.
14. Windows will now detect "Belkin USB 2.0 Hi-Speed Host
Controller". Click "Next".
15. Windows will locate the required drivers and complete
installation of the "Belkin USB 2.0 Hi-Speed Host
Controller" and "USB 2.0 Root Hub Device".
Installation of the Card is now complete.
Verifying Proper Installation (Windows 98 SE)
Check the "Windows Device Manager" to confirm that your PCI
Card has been properly installed.
1. Right-click on "My Computer" and select "Properties".
2. Select the "Device Manager" tab.
3. Click on the plus sign (+) next to "Universal Serial
Bus Controllers".
9/30/02 3:48 PM Page 6
6