Whittier Wood Products 172Wa Manual Del Usuario página 6

N
x4
FIG. 7
7)
The front of the Return Swivel (M) is stamped. Attach the swivel to the lower assembly. Rotate
the swivel slightly and use #14 x 3/4" Pan Head Screw (N) into the holes in the leg assembly.
Start all screws and then tighten. See FIGURE 7.
N
x4
8) Cover your work surface with a cloth or piece of cardboard to protect the finished seat. Place the
top assembly upside down on the work surface. Position the lower assembly with the front of the
swivel towards the front of the seat. Rotate the swivel slightly and use #14 x 3/4" Pan Head
Screw (N) into the pilot holes in the seat. See FIGURE 8.
9) Tap Wood Plugs (O) into holes in the legs. Be sure smaller end goes in first. See FIGURE 9.
Page 6 — 172Wa, 179Wa, 194Wa, & 207Wa (Rev. 2/07)
N
N
N
FIG. 8
N
N
N
M
O
x4
FIG. 9
O
O