Visual Plus Corporation xpr MTT Guia De Inicio Rapido

MTT
1.1 Introduction
MTT is a request-to-exit switch, It will work independently (standalone) or can equally be connected via a controller to
provide exit from a secured area (Push Button Input). With its slim looks and die-cast metal body, the Metal Touch
combines elegance and aesthetics with ruggedness and reliability.
1.2 Features
- Feather light touch control
- Works in Pulse and Latch mode
- Ideal for a wide range of applications
- Vandal-resistant
- Resin Potted Electronics
Audio and Visual indications:
- Front dual light indication
- Buzzer sound on every touch
2.1 Mounting instructions
1. Identify a suitable location on wall or flat surface.
2. Stick the Drilling Template provided on chosen location. Drill 3 holes as indicated in the diagram.
3. Insert 3 nos. of 5 mm wall plugs provided into the drilled holes.
4. Route the cables through the holes provided in the BackPlate.
5. Fix the Backplate firmly on the wall using 3nos. of 3x30mm CSK screws
6. Connect wires.
7. After wiring, place the Housing over the fixed backplate and guide the slot into the backplate tab and
slide it downwards.
8. Fix the Housing to the Back-Plate with a M3 x 6 mm Security Screw on the bottom of the Housing using
a Security Screwdriver provided.
Important Note: Several layers of protection are provided against transient voltages from static discharge,
lightning and power supply spikes. For protection to be fully effective, earthing should be done correctly.
- Light switches
- Exit button (Access control)
- Elevator buttons
- Industrial panels
Touch Button Switch
2. 0 INSTALLATION
3. 0 WIRING and APPLICATIONS
1.0 OVERVIEW
1.3 Specifications
Input voltage:
Current consumption:
Relay Output:
Indicators-LED:
Operating Temperature:
Operating Humidity:
Dimension (mm):
Housing:
Touch Plate:
Protection:
12-24 VDC; 15-24 VAC;
max.65mA
2A at 24V DC / 120V AC
Normal - RED
Relay Operation – GREEN
o o
-20 to 50 C
Non-condensing up to 95%
92L x 51W x 25H
Die-cast Aluminium alloy housing
Stainless steel
IP65
a Visual Plus Corporation Company
UK