Publicidad
STEP 6 - ADJUST TILT TENSION/ POST INSTALLATION LEVEL
Adjust tilt mechanism tension with ratchet handle lever
Rotate ratchet
a) Rotate handle
clockwise as far as
handle lever
possible.
clockwise for
tensioning tilt
b) Pull handle to side
mechanism.
laterally (against
For additional
spring tension) and
tension pull
rotate
lever laterally,
counter-clockwise as
rotate counter
clock wise and
far as possible.
repeat and
c) Repeat steps a)
repeat tension
and b) until panel
holds desired tilt.
Built-in level feature for post installation correction
If necessary, adjust the
2 acorn nuts to snug,
not tight, tension. Slots
on head assembly are
wider than bolts. This
allows monitor plate
and television to move
3.5˚ in either direction.
P 11
Publicidad
