Making The Electrical Connections - HAMPTONBAY 91350 Guía De Uso Y Mantenimiento

Assembly - Hanging the Fan (continued)
6

Making the electrical connections

WARNING: Each wire connector supplied with this fan is
designed to accept up to one 12-gauge house wire and two wires
from the fan. If you have larger than 12-gauge house wiring or
more than one house wire to connect to the fan wiring, consult
an electrician for the proper size wire connectors to use.
CAUTION: If the supply wires are a different color, have this
unit installed by a licensed electrician.
IMPORTANT: Use the plastic wire connectors (CC) supplied with
your fan. Secure the connectors with electrical tape and ensure
there are no loose strands or connections.
NOTE: The fan comes with 54 inch lead wires for use with an
extended ball/downrod assembly. If using the 4.5 inch ball/
downrod assembly (B) provided, you can cut the lead wires to
your desired length (no shorter than 12 inches).
□
The fan comes with 54 in. lead wires for use with an extended
ball/downrod assembly. If using the 4.5 in. ball/downrod
assembly (B) provided, you can cut the lead wires to your
desired length (no shorter than 12 in.) This will make extra
room in the canopy (C), if you do not wish to cut the wires,
you will need to neatly wrap them.
□
Connect the fan motor white wire to the receiver white wire
using a wire connecting nut (CC).
□
Connect the fan motor black wire to the receiver black wire
using a wire connecting nut (CC).
□
Connect the fan motor blue wire to the receiver blue wire
using a wire connecting nut (CC).
□
Secure each wire connecting nut using electrical tape.
□
Turn the wire connecting nut (CC) upward and push the wiring
into the outlet box (MM).
Receiver (K)
Blue
CC (x3)
11
Please contact 1-855-HD-HAMPTON for further assistance.
Outlet box
in the ceiling
(MM)
Green
Receiver
Antenna
Black White
HAMPTONBAY.COM