Strong Racks SR600R Manual De Instrucciones página 13

Insert Inner Tube (#3) into the Down Tube (#2). Slide the Inner Tube up or down to
determine the desired height of the Strong Rack. You may want to consider the size of
your vehicle, your height, steps, ground storage, etc. Use three Large Carriage Bolts (A) and
three Small Nuts (B) to secure the tubes together. The flat head of the bolts should face
outward. Replicate this step for all four tubes ensuring that they are all the same height.
Tip: Count the exposed holes on the Inner Tube to ensure level installation.
Insert Inner Tube
Secure Down Tube
and Inner Tube
together using three
Large Carriage Bolts.
The bolts must be
used in the bottom
three holes of the
Down Tube.
5
Do
(Fully Extended)
Adjust height
Foot
Hardware Required:
A:
B:
not over
(Fully Retracted)
x12
x12
tighten.
Foot can rotate 90°
13