Publicidad
Idiomas disponibles
Idiomas disponibles
OVERHAUL
Symptom
Reason
No response
1.Matching freguency is not successfully
from the
made.
aircraft
2.Insufficient power with the aircraft or
transmitter.
The reaction
of aircraft is
1.Insufficient power with the transmitter.
not smart or
intermitting
2.Antenna of the aircraft is snapped off.
signal.
1.The aircraft is not placed on the level
The aircraft
can not make
ground when Matching freguency.
hovering or tilt
2.The trimmer key on the transmitter is
flying to one
side.
not reset.
PARTS (OPTIONAL)
Below are the parts available for your kindly selection.In order to facilitate our customers for placing an
order, we specially offer all kinds of parts for your kindly selection.You can buy these parts via our local
agent as well.
X3-01 fuselage
X3-04 rotating motor assembly
X3-07 circuit board
X3-10 transmitter
X3-02 window hood
X3-05 reversing-rotating
motor assembly
X3-08 battery
-8-
Troubleshooting
1.Re-Matching: First of all, switch on the
power of the transmitter,then switch on
the power of the aircraft and place it on
the level ground, finally pushing the
throttle lever to the highest and then
pull it back to the starting position.
2.Replace the battery of the transmitter
or charge the aircraft.
1.Replace the batteries inside the
transmitter.
2.Re-welding the antenna.
1.Re-Matching freguency.
2.Reset the trimmer key on the transmitter,
details please kindly check Page3
Functional Adjusting of Flying Resetting.
X3-03 blade protecting frame
X3-06 blades
X3-09 USB charging cable
Publicidad
