Technical Specifications - JOPIX AP-6 Manual De Instrucciones

7.- TECHNICAL SPECIFICATIONS:

7.1.- GENERAL:
- Frequency range:
- Channels number:
- Frequency control:
- Operating temperature:
- DC input voltage:
- Duty cycle:
- Dimensions (mm):
- Weight (gr.):
7.2.- TRANSMITTER:
- Frequency control:
- Maximum RF output power:
- Modulation:
- Antenna impedance:
- Current drain:
7.3.- RECEIVER:
- System:
- Intermediate frequencies:
- Sensitivity:
- Audio output power:
- Distortion:
- Image rejection:
- Adjacent channel selectivity:
- Signal / noise ratio:
- Current drain:
27 MHz citizen band (According to the programmed
multistandard mode).
Up to 80 AM / FM (refer to the frequency band table on 6
section).
PLL.
-10 ºC to +60 ºC.
13.8 / 24 VDC ±5 % (auto switching).
100 % (TX-RX-Standby).
187 (W) x 56 (H) x 85 (D).
564.
PLL synthesizer.
4 W @ 13.8 VDC / 24 VDC.
2 kHz ±0.2 % kHz (FM).
50 Ω.
1.8 A (maximum).
Double conversion superheterodyne.
1st: 10.7 MHz / 2nd: 450 Hz.
0.5 μV (AM), 0.25 μV @ 12 dB (FM).
3 W @ 8Ω (10 % distortion).
<5 % @ 1 kHz.
70 dB.
≥60 dB.
45 dB.
800 mA (maximum).
English - 11 -