Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting
When I pressed my heat transfer vinyl (HTV), the material would not stick to the garment and/or fell off
during washing. How do I fix this?
First verify if you are using the optimal setting (from manufacturer) for the material being used, most
important being temperature and pressure settings. If you are using the optimal settings then increase
pressure. Remember: the process is about adhering the material to the garment, so increasing pressure is
often the best solution.
When I peeled the carrier sheet from my HTV, the color vinyl came up off the garment but the adhesive
below it stayed in place. What happened?
You are most likely peeling the material too hot. HTV is like metallic, printed/fashion, and many others are
usually recommended for cold peel.
If that's not it, double check the garment you are pressing and make sure it's appropiate for the HTV you are
using. If the material has a coating of any kind, you might need to use special HTV specifically designed for
sticking to coated materials.
31
Publicidad
