Connecting To External Devices; Caring For Your Device - Mobinnova Beam BEAMATT-1198523 Guía De Usuario

Connecting to external devices

TV
– Your device has an external HDMI port that allows you
to connect it to a TV that supports HDMI input. Once
connected, you can view photos, play videos, listen to
music, and more on your TV. To navigate, you will still
use the controls that display on your Mobinnova Beam
smartbook. Simply tap the touchpad to display the control
panel.
– When playing a video, you will only see it on your TV
screen. It will not display on your Mobinnova Beam
screen.
– When playing music, the sound will default to your TV's
speakers. You can change this in the Settings/Audio folder.
16
– The HDMI cable is not included with your device; you will
need to purchase one at your local electronics store.
Monitor
To connect to an external monitor, use the VGA/RJ-45
Ethernet adapter cord that came with your device. Simply
plug one end into the VGA-Ethernet adapter port on your
device and the other end into the corresponding slot on
your monitor.
Bluetooth
To use a Bluetooth® device with your Mobinnova Beam
smartbook, you must set it up to work with your device.
This is called "pairing."
1. Follow the instructions that came with your Bluetooth
2. Using the touchpad, select
3. Click the "Setup" tab and make sure the "Bluetooth
™
4. Click the "Search" tab to find your Bluetooth device.
's
™
5. You will be prompted to enter a Pin Code. Enter any set of
6. You will then be prompted to enter this Pin Code on your

Caring for your device

By following some routine care and maintenance
procedures, you can extend the life and performance of
your device.
The device
– Always place your device on an even surface.
– Do not store your device on or near a heat source without
™ proper ventilation. Do not leave your device in direct
sunlight for prolonged periods. Overheating your device
may damage your device and increase risk of harm.
device to put it in pairing mode.
the top right of your screen. This opens the Bluetooth
Manager window.
Power" and "Visibility" radio buttons are set to "On" and
"Yes."
Once it appears in the search window, double click the
associated icon.
numbers or characters and press "OK."
Bluetooth device. Once entered, your Bluetooth device
will be paired with your Mobinnova Beam
from the status bar at
smartbook.
™
17