Stone & Leigh 536-3-68 Serie Instrucciones De Montaje página 7

Step 2: (The final and most important) Checklist.
Inspect the bed once again to assure that all bolts are tight and that no hardware is missing. (if you

are missing hardware, contact Stanley Furniture immediately for replacement and do not use the
bed until the new hardware arrives).
Do not place the bed near a window where the child may have access to window coverings, cords

or draperies as these articles pose a strangulation hazard.
Replace the instructions in the holder provided. KEEP THE INSTRUCTIONS WITH THE BED.

Install the crib mattress.

Follow all the warnings on the use of this bed and all products in the bed.

CAUTION: Any mattress used in this bed must be at least 27-1/4" by 51-5/8" with a thickness of

no less than 4 inches and not exceeding 6 inches.
Conversion from Toddler Bed to Daybed.
Your Built to Grow Toddler Bed can be converted to
a Daybed by removing the Toddler Safety Rail from
the Toddler Bed/Daybed Conversion Kit. Refer to
page 6 of this instruction booklet.
Conversion to a Full Size (4/6) Bed.
Items are available to convert your crib to a full-size bed.
Contact your Stanley Furniture dealer to purchase these
items. Instructions to convert the Built to Grow crib are on
page 14 of the crib instructions booklet.
Final Step
7