Publicidad
Idiomas disponibles
Idiomas disponibles
Sublimation process
IMPORTANT: The process explained below can vary depending on the quality of the material and its
manufacturers.
A) Flat heat press
1.
Print the design on sublimation paper.
2.
Turn ON the heat press to adjust temperature and time of the process.
3.
Wait until the heat press reaches the correct temperature.
4.
Place the garment on the base.
5.
Use the handle to carefully lower the heating plate.
Press the ■ button (square) to start the countdown. Wait until the countdown finishes and the
6.
press turns the time alarm on.
Press the ■ button (square) to turn off the countdown alarm.
7.
8.
Use the handle to raise the heating plate and remove the garment from the base.
9.
Remove the excess material to finish the process.
27
Publicidad
