Working Conditions - KUBUS W3 Scan Manual Del Usuario

IMPORTANT W3 Scan probe maintenance
5. Correct use recommendations
- To avoid probe overheating issues, place the probe on stand-by for
at least 5 minutes after prolonged use (25min)
- Turn the probe off when not in use, never leave the probe on
- After performing the scan, clean the probe carefully. Use a wet wipe
to avoid scratching the porous membrane.
- Use original charger when charging the probe.
- Handle the probe with care.
6. Storage conditions
- Temperature: -40 to +50°C
- Humidity: 10 to 85% (without condensation)
- Atmospheric pressure: between 500 and 1060hPa

7. Working conditions

- Temperature: +5 to +40°C
- Humidity: 30 to 85% (without condensation)
- Atmospheric pressure: between 700 and 1060hPa
8. Transport conditions
- Temperature: +5 to 40°C
- Humidity: 30 to 85% (without condensation)
- Atmospheric pressure: between 700 and 1060hPa