heysong VIBE Manual De Instrucciones página 5

When Charging Your Speaker
Solid red LED = Charging
No red LED = Charge Complete
When Pairing Your Speaker To A Bluetooth Audio Source
Rapid blinking blue LED: Bluetooth not connected. (Ready to pair.)
Solid blue LED: Bluetooth connected.
In order to pair your Bluetooth audio device to your Bluetooth Speaker for the first time,
follow the steps below:
1). Make sure your Bluetooth audio source is held within ttiree meters of your speaker.
2). Press and hold the "
The LED light will blink blue to indicate that you have entered pairing status.
3). Go to the Bluetooth Manager of your Bluetooth audio source. Please refer to the
User's Manual of your Bluetooth audio source for more information.
4). Search Bluetooth devices and select " HEYSONG VIBE ".
5). Once paired, the blue LED light will be solid and you can use your speaker to listen
to audio from you Bluetooth sound source.
NOTE:
Long press the "
When an iPhone or other smartphone is connected to your speaker follow the steps
below to take calls hands-free.
1.Press" "to pick up the call.
2.Press and hold "
3.During call: Press"
If you have two of HEYSONG VIBE , you can use multiple point to achieve wireless
stereo combined playing music.
1.Make sure two T6 are without any Bluetooth connection.
2.Power on both units and press"
connect automatically with indicated tone. When blue LED blink quickly on the one unit
and solid on the other one.it means the multiple point connection is successful.
3.Under connection, search Bluetooth device and select" HEYSONG VIBE".
4.When the device and the units are connected, the blue LED of both units will be solid.
5.Long press the "
connection.
6.Long press the "
Bluetooth from the device.
" switch on your speaker to power on.
" key to disconnect the Bluetooth from the device.
" to reject the call.
"again to hang up the call.
" button on the speaker, the two speakers will
" key on one of the speakers to disconnect the TWS
" key again on one of the speakers to disconnect the