Before Starting; Battery Installation; Getting Started - Creative Baby i-Mat Manual Del Usario

Before Starting

Refer to Instructions for Care and Important Safety Instructions before proceeding.

Battery Installation:

1. To remove the battery cover, loosen the screw on the battery compartment with a
screwdriver or other household tool.
2. Remove battery cover and insert 2 new AAA alkaline batteries as shown in the polarity (+/-
) diagram inside the battery compartment.
3. Close the battery cover securely and tighten the screw.
WARNING:
• Do not mix old and new batteries.
• Do not mix alkaline, standard(Zn-C), or rechargeable(Ni-Cad) batteries.
• Batteries are small objects and are a choking hazard. With battery cover removed,
batteries are exposed. Children should not have access to product when cover is
removed.
• Only an adult should install batteries or connect product to computer.

Getting Started

Turn on the Voice Pen™: The opening switch is located on the side of the Voice Pen™. There
are 3 modes to the Voice Pen™: FREE PLAY, MUSIC, and CUSTOM RECORDING.
02
ON/OFF Switch
OFF ON
LOW
ON
HIGH