Tabla de contenido
Publicidad
Leveling method - 1
1. Place the level in the X-axis direction.
2. If the position of the water drop is on the right side, the right side is high.
3. Turn the leveling bolt on the machine's right side counterclockwise to lower the
right side.
4. Turn the leveling bolt on the machine's left side clockwise to raise the left side.
5. Balance the front and rear leveling bolts.
6. Adjust water drop to the center.
<Note> Use of a 30 mm spanner is recommended.
http://www.coreedm.com
-4-
Publicidad
Tabla de contenido
