Skiddoü Sunt Manual De Usario página 11

child. Always buckle the belts when the child is seated in the feeding chair.
Safety belt assembly/removal:
Pull the plastic ring of the opening in the seat and the cover (Fig. 4C). Repeat this step for all
belts and straps. To assemble the belts, perform the same steps in reverse, first sliding the belts
through the opening in the cover and then in the seat, such that the ring locks as shown in figure
4D.
E. Cover removal:
To remove the upholstery, slide the belts out of the seat (Fig.4C) and remove the cover. WARNING
- never use the product without the cover on.
F . Low chair for children
The product may be used as a low chair. Begin the change by removing the tray and then remove
the bottom legs and screw in the pads (6) provided in the kit instead, as shown in Figure 5B. Once
the pads are tightened, make sure the chair is stable. Do not remove the footrest. If the child
no longer requires the security offered by belts, the belts may be removed following information
provided in point 2D. The transformed chair is shown in Figure 5C.
The low chair is intended for children aged 24-60 months, with the maximum body weight up to 20
kg.
<36m
3. Care and maintenance
Note! Check the product regularly for any damage. Do not use the product if damage was
identified.
Chair: Clean using a clean, wet cloth/sponge or use a mild detergent. Do not use solvents,
ammonia or petroleum. The product should be wiped clean after each use to avoid
discolourations.
Belts: Buckle up together. Wash manually. Do not bleach. Do not dry in a tumble dryer. Do not iron.
Do not dry clean.
10
15
24-60m
20