Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
The person responsible for the instrument must ensure that the equipment is used in accordance
with the instructions. This person is also
training and for the safety of the equipment when in use. The person in charge of the instrument
has the following duties:
• To understand the safety instructions on the product and the instructions in the User Manual.
• To be familiar with local safety regulations relating to accident prevention.
• To inform local dealer immediately if the equipment becomes unsafe.
Hazards in use measurements if the instrument is defective or if it has been dropped or has been
misused or modified.
Precautions:
Carry out test measurements periodically. Particularly after the instrument has been subject to
abnormal use, and before, during orafter important measurements. Make sure the optics is kept
clean andthat there is no mechanical damage to the bumpers.
CAUTION:
In using the instrument for distance measurements or for positioning moving objects (e.g. cranes,
building equipment, platforms, etc. ) unforeseen events may cause erroneous measurements.
Precautions:
Only use this product as a measuring sensor, not as a controlling device. Your system must be
configured and operated
CAUTION:
Watch out for erroneous distance in such a way, that in case of an erroneous measurement,
malfunction of the device or power failure due to installed safety measures (e.g. safety limit
switch), it is assured that no damage will occur.
WARNING:
Flat batteries must not be disposed of with household waste. Care for the environment and take
them to the collecting points provided in accordance with national or local regulations.
The product must not be disposed of with household waste. Dispose of the product appropriately in
accordance with the national. Regulations in force in your country. Always prevent access to the
product by unauthorized personnel.
Technical Support:
Electromagnetic Compatibility (EMC)
The term "electromagnetic compatibility" is taken to mean the capability of the product· to function
smoothly in an environment where electromagnetic radiation and electrostatic discharges are
present, and without causing electromagnetic. Interference to other equipment.
WARNING:
The product conforms to the most stringent requirements of the relevant standards and
regulations. Yet, the possibility of it causing interference in other devices cannot be totally
accountable for the deployment of personnel and for their
11
Publicidad
