KUBUS STX Guía De Usario página 14

BOARD DEFLATION STEPS
1. Clear any water or debris out of the valve areas.
2. Slowly press down on the valve stem to start letting air out of the board. There will be an ini-
tial burst of air, but that will slow down very quickly. Once the air flow has slowed down, press
the valve stem all the way down and turn it clockwise to lock it into the "OPEN" position.
3-4 Remove the pin and remove the central fin. Slide forward.
5-6. Start to fold the board in small sections, beginning at the back end until you reach the side
fins.
7. Place the protectors over the side fins to prevent any damage to the board.
8-9. Carry on folding until you reach the end of the board. Once folded, use the strap to keep
the board folded inside the bag.
EN
13