Precautions For Use - LiMURAL LM-Y2 Operación Manual

2. Parameters
Motor
Primary material: Highly durable brass
Pro Hair
Clippers
Battery
Full charge operation cycle: Roughly 4hr
Applicable Adapter Type

3. Precautions for Use

1 .Please do not disassemble the product.
2.The product cannot be washed with running water.
Do not store it in a humid environment.
02
English
Operation voltage: 3V
2000 mA Li-ion battery
Charging time: Roughly 3hr
Input: 100-240v~50/60Hz
Output:5V 1000mA
40°
0°
3.The product can only be cleaned with a slightly wet cloth or wipe with mild soap.
4.Do not charge the product at a temperature above 40°C or below 0°C.
※ The product might generate slight heat during charging or usage, this is normal.
※ Please safely remove the battery, and follow all proper protocols in your area for the
disposal of the battery, when the battery's service life ends.
4. Fixed-length Function
Adjustable Cutting Length Function
1.Use the clipper blade lever to adjust the length of your
hair left after haircut. You will be left with hair that is
ranging from 0.8mm-2mm in length without guide
combs.
2.When the blade lever is in the uppermost position, the
clipper will give the closest cut. Push the lever
downward to gradually increase the cutting length.
Usage of Guide Combs
1 .Determine the length of the hair that will be cut.
2.Select the appropriate guide combs.
Mounting the guide comb
1 .Align the guide comb with the edge of the blade lining
up the blade and carefully push the comb forward and
hook the comb over the teeth at the front of the clipper
blade.
2.Slightly push the guide comb down until it snaps into
place.
3.To remove the guide comb, pull it off of the blades .
※The guide come will not fall off while in use if mounted
properly.
03
English