Electrical Connection - ASURITY FP-22 Manual Del Usuario

INSTALLATION (continued)

ELECTRICAL CONNECTION

7. ELECTRICAL CONNECTION
WARNING: RISK OF ELECTRIC SHOCK
This pump must be properly connected to power following the
National Electric Code (NEC). Failure to follow these warnings will void
warranty and could result in a fatal electric shock. A green LED will
indicate if power is available.
This pump is supplied with a grounding conductor and grounding
type attachment plug. To reduce the risk of electric shock, be certain
that it is connected only to a properly grounded, grounding-type
receptacle.
PLUG NOTE: REMOVAL OF THE WALL SIDE ELECTRICAL PLUG MAY
BE PERMISSIBLE IF:
1. The power leads, after plug removal, are connected directly within an
approved junction or conduit box, as judged by the local authority having
jurisdiction.
2. The modification is performed by a qualified technician.
3. The modification meets code compliant requirements according to the
local authority. This modification does not void the factory warranty. Final
installations should always be inspected and approved by the local
authority according to the requirements set forth by the same local
authority.
w w w. d i v e r s i t e c h . c o m | 8 0 0 . 9 9 5 . 2 2 2 2
PA G E 9