Loading The Furnace - ceramill Therm DRS Modo De Empleo

Firing tray + Ceramic pins
Fig. 21 Firing tray + Ceramic pins
The firing tray with ceramic pins is suitable for
glaze and stain firing of zirconium oxide.
A P P L I C A T I O N
7.2

Loading the furnace

NOTE:
Insufficient firing results!
Under no circumstances may a dental restora-
tion be placed in the furnace without an underlay
on the sintering base.
▷ Always use one of the firing aids.
To sinter a dental restoration, the loaded firing aid
must be placed on the sintering base in the fur-
nace.
Position sintering objects at one end of the
firing aid if possible.
▷ Select the appropriate firing aid according to
the planned sintering process.
When using the sintering pad:
▷ Place sintering objects directly on the sintering
pad with the occlusal side facing down. Ensure
stable positioning on the carrier, so that the
object does not fall down during door move-
ment.
Fig. 22 Sintering base with sintering object
When using the sintering bowl:
▷ Fill sintering bowl with sintering pearls.
▷ Place sintering objects directly on the sintering
pearls with the occlusal side facing down.
E N
41