Publicidad
Idiomas disponibles
Idiomas disponibles
Model HD-3000 series
CONGRATULATIONS!
You have just
acquired
the perfect
complement
to brushing,
and you have
started the path
towards a healthier
smile.
1
Charge the
unit for 4hs,
connecting
it to the
charger.
4
Press the "mode"
button and adjust to
the desired pressure.
Start with soft
pressure until you get
used to it, and then
increase as desired.
6
gum, and run the entire
line through each tooth,
each tooth.
TO AVOID SPLASHING, KEEP IT INSIDE YOUR MOUTH WITH
IT MAY BLEED IN THE GUMS DURING THE FIRST USES, DON´T PANIC,
IT WILL DISAPPEAR AFTER FEW USES. IF BLEEDING PERSISTS FOR
benefits, please register your product
Quick Start Guide
Start by aiming at the
8
To rinse and clean the tank and keep the
equipment in perfect condition, dry the
HidroDent on the outside, and holding it steady
with one hand, turn the tank counterclockwise
and remove it gently.
ENCLOSED LIPS WHILE THE UNIT IS ON.
MORE THAN A WEEK, CONSULT YOUR DENTIST.
In order to facilitate the warranty
process, and receive incredible
here and forget about the receipt:
hidrodent.com/registro
At HidroDent
health is the most important.
We want our clients to be 100%
results obtained. If you have any
issue, PLEASE CONTACT US
BEFORE RETURNING THE
PRODUCT to,
info@hidrodent.com or contact us
through our website:
www.hidrodent.com
2
Insert the
tip of your
choice until it
clicks. To eject
it, press the
button. Do not
use without a
tip, and do not
eject the tip
while running
5
close your lips to avoid splashing,
and then press the ON button. Try
to keep the HidroDent in a 90°
position to ensure continuous
, your dental
®
3
Open the lid
of the tank and
water. You can
add mouthwash
Insert the tip into your mouth,
7
Once irrigation is
complete, empty the tank
completely, and leave it
open to avoid humidity
and condensation inside.
Publicidad
