BS BATTERY BSLi-01 Instrucciones De Uso Y Mantenimiento página 4

CHARGING
• The new battery can be used directly if the voltage is
above 13V, while an initial charging is still recommended
until battery is fully-charged.
• Charge the lithium battery with a conventional lead acid
battery 12V charger (without function of automatic de-
sulfation or pulse charging function) or BS 10, BS 30,
BK 20, under parameters listed as below:
Charging voltage
Model
Standard Maximum
BSLi-01
BSLi-02
BSLi-03
BSLi-04
BSLi-05
BSLi-06
14.4V
BSLi-07
BSLi-08
BSLi-09
BSLi-10
BSLi-11
BSLi-12
6
Charging current
Standard Maximum
Less than Less than
1 hour 30 min
1A
1A
1.5A
2A
2A
2A
14.8V
2.5A
2.5A
3A
3A
4A
4A
• In order to maximize the battery lifespan, please ensure
the charging time not exceed 30 minutes while charging
at the maximum current even if the battery has been
completely discharged.
• The charging voltage should never be higher than 15V.
• When charging separately, always remove the battery
from the vehicle.
• Charge the battery with a lower current than the Maxi-
mum Charging Current found in the specifications Data.
• If the battery seems hot when touching, stop charging.
Allow battery to cool down before resuming.
• After charging, leave the battery for 1 to 2 hours before
checking the voltage. If the voltage is less than 12.4 volts,
additional charging is necessary.
4A
INSTALLATION
4A
6A
• Please check the battery state before installation, and
charge it if necessary.
8A
8A
Ready to use
8A
Charging suggested
10A
10A
Charging necessary
12A
Abnormal
12A
16A
16A
www.bs-battery.com
7