HYPERLED EC-ECR-100 Manual De Instrucciones página 4

Lighting Switch with remote control
Technical data
Range of 50 meters
Power: 1000W. Fuse 5A
Frequency: 433,92Hz
It can be managed with 3 differents remote controls
Input: 220-240V/50Hz
The remote control, or switch must be purchased separately as
accesory.
Instalation
The module has to be away from the radio signal generator
devices (WiFi, ADSL, phone, microwaves, etc). Avoid metallic
barriers.
Unplug the power supply.
Connect the phase and neutral wires of the power supply (230V),
the phase to the L terminal and the neutral to the N terminal.
Using an isolated wire (0,75mm² minimun) connect the L
terminal with the COM terminal.
Connect the circuit according to the configuration of your
setting-up.
Plug in the power supply.
Then, make the remote-control coding with the control device.
Remote control coding
Coding button
230VAC
Push for 3 seconds the coding button, then push the start button
of the remote control in the zone you want the circuit works.
LED Indicator